ايران ويج

صفحه‌ها: 1 2

من برنامه رو ننوشتم، ویزاد کدویژن رو تنظیم کردم این برنامه رو جنریت کرد. اما واقعا تعجب میکنم که این آکولاد چرا اینجوریه؟

کد: 
/*****************************************************

This program was produced by the

CodeWizardAVR V2.05.0 Professional

Automatic Program Generator

© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.

http://www.hpinfotech.com

Project : 

Version : 

Date    : 12/20/2011

Author  : 

Company : 

Comments: 

Chip type               : ATmega128

Program type            : Application

AVR Core Clock frequency: 16.000000 MHz

Memory model            : Small

External RAM size       : 0

Data Stack size         : 1024

*****************************************************/

#include <mega128.h>

#ifndef RXB8

#define RXB8 1

#endif

#ifndef TXB8

#define TXB8 0

#endif

#ifndef UPE

#define UPE 2

#endif

#ifndef DOR

#define DOR 3

#endif

#ifndef FE

#define FE 4

#endif

#ifndef UDRE

#define UDRE 5

#endif

#ifndef RXC

#define RXC 7

#endif

#define FRAMING_ERROR (1<<FE)

#define PARITY_ERROR (1<<UPE)

#define DATA_OVERRUN (1<<DOR)

#define DATA_REGISTER_EMPTY (1<<UDRE)

#define RX_COMPLETE (1<<RXC)

// USART0 Receiver buffer

#define RX_BUFFER_SIZE0 16

char rx_buffer0[RX_BUFFER_SIZE0];

#if RX_BUFFER_SIZE0 <= 256

unsigned char rx_wr_index0,rx_rd_index0,rx_counter0;

#else

unsigned int rx_wr_index0,rx_rd_index0,rx_counter0;

#endif

// This flag is set on USART0 Receiver buffer overflow

bit rx_buffer_overflow0;

// USART0 Receiver interrupt service routine

interrupt [USART0_RXC] void usart0_rx_isr(void)

{

char status,data;

status=UCSR0A;

data=UDR0;

if ((status & (FRAMING_ERROR | PARITY_ERROR | DATA_OVERRUN))==0)

   {

   rx_buffer0[rx_wr_index0++]=data;

#if RX_BUFFER_SIZE0 == 256

   // special case for receiver buffer size=256

   if (++rx_counter0 == 0)

      {

#else

   if (rx_wr_index0 == RX_BUFFER_SIZE0) rx_wr_index0=0;

   if (++rx_counter0 == RX_BUFFER_SIZE0)

      {

      rx_counter0=0;

#endif

      rx_buffer_overflow0=1;

      }

   }

}

#ifndef _DEBUG_TERMINAL_IO_

// Get a character from the USART0 Receiver buffer

#define _ALTERNATE_GETCHAR_

#pragma used+

char getchar(void)

{

char data;

while (rx_counter0==0);

data=rx_buffer0[rx_rd_index0++];

#if RX_BUFFER_SIZE0 != 256

if (rx_rd_index0 == RX_BUFFER_SIZE0) rx_rd_index0=0;

#endif

#asm("cli")

--rx_counter0;

#asm("sei")

return data;

}          

  }

#pragma used-

#endif

// Standard Input/Output functions

#include <stdio.h>

// Declare your global variables here

void main(void)

{

// Declare your local variables here

// Input/Output Ports initialization

// Port A initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out 

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0 

PORTA=0x00;

DDRA=0xFF;

// Port B initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out 

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0 

PORTB=0x00;

DDRB=0xFF;

// Port C initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out 

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0 

PORTC=0x00;

DDRC=0xFF;

// Port D initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 

PORTD=0x00;

DDRD=0x00;

// Port E initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 

PORTE=0x00;

DDRE=0x00;

// Port F initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 

PORTF=0x00;

DDRF=0x00;

// Port G initialization

// Func4=In Func3=In Func2=In Func1=In Func0=In 

// State4=T State3=T State2=T State1=T State0=T 

PORTG=0x00;

DDRG=0x00;

// Timer/Counter 0 initialization

// Clock source: System Clock

// Clock value: Timer 0 Stopped

// Mode: Normal top=0xFF

// OC0 output: Disconnected

ASSR=0x00;

TCCR0=0x00;

TCNT0=0x00;

OCR0=0x00;

// Timer/Counter 1 initialization

// Clock source: System Clock

// Clock value: Timer1 Stopped

// Mode: Normal top=0xFFFF

// OC1A output: Discon.

// OC1B output: Discon.

// OC1C output: Discon.

// Noise Canceler: Off

// Input Capture on Falling Edge

// Timer1 Overflow Interrupt: Off

// Input Capture Interrupt: Off

// Compare A Match Interrupt: Off

// Compare B Match Interrupt: Off

// Compare C Match Interrupt: Off

TCCR1A=0x00;

TCCR1B=0x00;

TCNT1H=0x00;

TCNT1L=0x00;

ICR1H=0x00;

ICR1L=0x00;

OCR1AH=0x00;

OCR1AL=0x00;

OCR1BH=0x00;

OCR1BL=0x00;

OCR1CH=0x00;

OCR1CL=0x00;

// Timer/Counter 2 initialization

// Clock source: System Clock

// Clock value: Timer2 Stopped

// Mode: Normal top=0xFF

// OC2 output: Disconnected

TCCR2=0x00;

TCNT2=0x00;

OCR2=0x00;

// Timer/Counter 3 initialization

// Clock source: System Clock

// Clock value: Timer3 Stopped

// Mode: Normal top=0xFFFF

// OC3A output: Discon.

// OC3B output: Discon.

// OC3C output: Discon.

// Noise Canceler: Off

// Input Capture on Falling Edge

// Timer3 Overflow Interrupt: Off

// Input Capture Interrupt: Off

// Compare A Match Interrupt: Off

// Compare B Match Interrupt: Off

// Compare C Match Interrupt: Off

TCCR3A=0x00;

TCCR3B=0x00;

TCNT3H=0x00;

TCNT3L=0x00;

ICR3H=0x00;

ICR3L=0x00;

OCR3AH=0x00;

OCR3AL=0x00;

OCR3BH=0x00;

OCR3BL=0x00;

OCR3CH=0x00;

OCR3CL=0x00;

// External Interrupt(s) initialization

// INT0: Off

// INT1: Off

// INT2: Off

// INT3: Off

// INT4: Off

// INT5: Off

// INT6: Off

// INT7: Off

EICRA=0x00;

EICRB=0x00;

EIMSK=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization

TIMSK=0x00;

ETIMSK=0x00;

// USART0 initialization

// Communication Parameters: 8 Data, 1 Stop, No Parity

// USART0 Receiver: On

// USART0 Transmitter: Off

// USART0 Mode: Asynchronous

// USART0 Baud Rate: 9600

UCSR0A=0x00;

UCSR0B=0x90;

UCSR0C=0x06;

UBRR0H=0x00;

UBRR0L=0x67;

// USART1 initialization

// USART1 disabled

UCSR1B=0x00;

// Analog Comparator initialization

// Analog Comparator: Off

// Analog Comparator Input Capture by Timer/Counter 1: Off

ACSR=0x80;

SFIOR=0x00;

// ADC initialization

// ADC disabled

ADCSRA=0x00;

// SPI initialization

// SPI disabled

SPCR=0x00;

// TWI initialization

// TWI disabled

TWCR=0x00;

// Watchdog Timer initialization

// Watchdog Timer Prescaler: OSC/2048k

#pragma optsize-

WDTCR=0x1F;

WDTCR=0x0F;

#ifdef _OPTIMIZE_SIZE_

#pragma optsize+

#endif

// Global enable interrupts

#asm("sei")

while (1)

      {

      // Place your code here

      }

}

حالا من محاسباتم رو کجای این برنامه وارد کنم؟؟؟ محاسباتی که با هر اینترآپت باید تغییر کنه و آپدیت بشه.

عجیبه من دیروز برنامه رو جنریت کردم اون آکولاد رو کم گذاشته بود، فکر کنم امروز یادش اومده که سوتی داده درستش کرده

کد: 
/*****************************************************

This program was produced by the

CodeWizardAVR V2.05.0 Professional

Automatic Program Generator

© Copyright 1998-2010 Pavel Haiduc, HP InfoTech s.r.l.

http://www.hpinfotech.com

Project :

Version :

Date    : 12/20/2011

Author  :

Company :

Comments:

Chip type               : ATmega128

Program type            : Application

AVR Core Clock frequency: 16.000000 MHz

Memory model            : Small

External RAM size       : 0

Data Stack size         : 1024

*****************************************************/

#include <mega128.h>

#ifndef RXB8

#define RXB8 1

#endif

#ifndef TXB8

#define TXB8 0

#endif

#ifndef UPE

#define UPE 2

#endif

#ifndef DOR

#define DOR 3

#endif

#ifndef FE

#define FE 4

#endif

#ifndef UDRE

#define UDRE 5

#endif

#ifndef RXC

#define RXC 7

#endif

#define FRAMING_ERROR (1<<FE)

#define PARITY_ERROR (1<<UPE)

#define DATA_OVERRUN (1<<DOR)

#define DATA_REGISTER_EMPTY (1<<UDRE)

#define RX_COMPLETE (1<<RXC)

// USART0 Receiver buffer

#define RX_BUFFER_SIZE0 16

char rx_buffer0[RX_BUFFER_SIZE0];

#if RX_BUFFER_SIZE0 <= 256

unsigned char rx_wr_index0,rx_rd_index0,rx_counter0;

#else

unsigned int rx_wr_index0,rx_rd_index0,rx_counter0;

#endif

// This flag is set on USART0 Receiver buffer overflow

bit rx_buffer_overflow0;

// USART0 Receiver interrupt service routine

interrupt [USART0_RXC] void usart0_rx_isr(void)

{

char status,data;

status=UCSR0A;

data=UDR0;

if ((status & (FRAMING_ERROR | PARITY_ERROR | DATA_OVERRUN))==0)

   {

   rx_buffer0[rx_wr_index0++]=data;

//***************************************************************

اینجا

//***************************************************************

#if RX_BUFFER_SIZE0 == 256

   // special case for receiver buffer size=256

   if (++rx_counter0 == 0)

      {

#else

   if (rx_wr_index0 == RX_BUFFER_SIZE0) rx_wr_index0=0;

   if (++rx_counter0 == RX_BUFFER_SIZE0)

      {

      rx_counter0=0;

#endif

      rx_buffer_overflow0=1;

      }

   }

}

#ifndef _DEBUG_TERMINAL_IO_

// Get a character from the USART0 Receiver buffer

#define _ALTERNATE_GETCHAR_

#pragma used+

char getchar(void)

{

char data;

while (rx_counter0==0);

data=rx_buffer0[rx_rd_index0++];

#if RX_BUFFER_SIZE0 != 256

if (rx_rd_index0 == RX_BUFFER_SIZE0) rx_rd_index0=0;

#endif

#asm("cli")

--rx_counter0;

#asm("sei")

return data;

}          

  }

#pragma used-

#endif

// Standard Input/Output functions

#include <stdio.h>

// Declare your global variables here

void main(void)

{

// Declare your local variables here

// Input/Output Ports initialization

// Port A initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0

PORTA=0x00;

DDRA=0xFF;

// Port B initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0

PORTB=0x00;

DDRB=0xFF;

// Port C initialization

// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out

// State7=0 State6=0 State5=0 State4=0 State3=0 State2=0 State1=0 State0=0

PORTC=0x00;

DDRC=0xFF;

// Port D initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T

PORTD=0x00;

DDRD=0x00;

// Port E initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T

PORTE=0x00;

DDRE=0x00;

// Port F initialization

// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In

// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T

PORTF=0x00;

DDRF=0x00;

// Port G initialization

// Func4=In Func3=In Func2=In Func1=In Func0=In

// State4=T State3=T State2=T State1=T State0=T

PORTG=0x00;

DDRG=0x00;

// Timer/Counter 0 initialization

// Clock source: System Clock

// Clock value: Timer 0 Stopped

// Mode: Normal top=0xFF

// OC0 output: Disconnected

ASSR=0x00;

TCCR0=0x00;

TCNT0=0x00;

OCR0=0x00;

// Timer/Counter 1 initialization

// Clock source: System Clock

// Clock value: Timer1 Stopped

// Mode: Normal top=0xFFFF

// OC1A output: Discon.

// OC1B output: Discon.

// OC1C output: Discon.

// Noise Canceler: Off

// Input Capture on Falling Edge

// Timer1 Overflow Interrupt: Off

// Input Capture Interrupt: Off

// Compare A Match Interrupt: Off

// Compare B Match Interrupt: Off

// Compare C Match Interrupt: Off

TCCR1A=0x00;

TCCR1B=0x00;

TCNT1H=0x00;

TCNT1L=0x00;

ICR1H=0x00;

ICR1L=0x00;

OCR1AH=0x00;

OCR1AL=0x00;

OCR1BH=0x00;

OCR1BL=0x00;

OCR1CH=0x00;

OCR1CL=0x00;

// Timer/Counter 2 initialization

// Clock source: System Clock

// Clock value: Timer2 Stopped

// Mode: Normal top=0xFF

// OC2 output: Disconnected

TCCR2=0x00;

TCNT2=0x00;

OCR2=0x00;

// Timer/Counter 3 initialization

// Clock source: System Clock

// Clock value: Timer3 Stopped

// Mode: Normal top=0xFFFF

// OC3A output: Discon.

// OC3B output: Discon.

// OC3C output: Discon.

// Noise Canceler: Off

// Input Capture on Falling Edge

// Timer3 Overflow Interrupt: Off

// Input Capture Interrupt: Off

// Compare A Match Interrupt: Off

// Compare B Match Interrupt: Off

// Compare C Match Interrupt: Off

TCCR3A=0x00;

TCCR3B=0x00;

TCNT3H=0x00;

TCNT3L=0x00;

ICR3H=0x00;

ICR3L=0x00;

OCR3AH=0x00;

OCR3AL=0x00;

OCR3BH=0x00;

OCR3BL=0x00;

OCR3CH=0x00;

OCR3CL=0x00;

// External Interrupt(s) initialization

// INT0: Off

// INT1: Off

// INT2: Off

// INT3: Off

// INT4: Off

// INT5: Off

// INT6: Off

// INT7: Off

EICRA=0x00;

EICRB=0x00;

EIMSK=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization

TIMSK=0x00;

ETIMSK=0x00;

// USART0 initialization

// Communication Parameters: 8 Data, 1 Stop, No Parity

// USART0 Receiver: On

// USART0 Transmitter: Off

// USART0 Mode: Asynchronous

// USART0 Baud Rate: 9600

UCSR0A=0x00;

UCSR0B=0x90;

UCSR0C=0x06;

UBRR0H=0x00;

UBRR0L=0x67;

// USART1 initialization

// USART1 disabled

UCSR1B=0x00;

// Analog Comparator initialization

// Analog Comparator: Off

// Analog Comparator Input Capture by Timer/Counter 1: Off

ACSR=0x80;

SFIOR=0x00;

// ADC initialization

// ADC disabled

ADCSRA=0x00;

// SPI initialization

// SPI disabled

SPCR=0x00;

// TWI initialization

// TWI disabled

TWCR=0x00;

// Watchdog Timer initialization

// Watchdog Timer Prescaler: OSC/2048k

#pragma optsize-

WDTCR=0x1F;

WDTCR=0x0F;

#ifdef _OPTIMIZE_SIZE_

#pragma optsize+

#endif

// Global enable interrupts

#asm("sei")

while (1)

      {

      // Place your code here

      }

}

اونجایی که نوشتم اینجا. :دی

سلام
من هم با ويزارد اينتراپت رو فعال كردم. اينطوريه و هيچ مشكلي نداره :

کد: 
interrupt [USART0_RXC] void usart0_rx_isr(void)

{

char status,data;

status=UCSR0A;

data=UDR0;

if ((status & (FRAMING_ERROR | PARITY_ERROR | DATA_OVERRUN))==0)

   {

   rx_buffer0[rx_wr_index0++]=data;

#if RX_BUFFER_SIZE0 == 256

   // special case for receiver buffer size=256

   if (++rx_counter0 == 0) rx_buffer_overflow0=1;

#else

   if (rx_wr_index0 == RX_BUFFER_SIZE0) rx_wr_index0=0;

   if (++rx_counter0 == RX_BUFFER_SIZE0)

      {

      rx_counter0=0;

      rx_buffer_overflow0=1;

      }

#endif

   }

}

#ifndef _DEBUG_TERMINAL_IO_

// Get a character from the USART0 Receiver buffer

#define _ALTERNATE_GETCHAR_

#pragma used+

char getchar(void)

{

char data;

while (rx_counter0==0);

data=rx_buffer0[rx_rd_index0++];

#if RX_BUFFER_SIZE0 != 256

if (rx_rd_index0 == RX_BUFFER_SIZE0) rx_rd_index0=0;

#endif

#asm("cli")

--rx_counter0;

#asm("sei")

return data;

}

#pragma used-

#endif

// USART0 Transmitter buffer

#define TX_BUFFER_SIZE0 8

char tx_buffer0[TX_BUFFER_SIZE0];

#if TX_BUFFER_SIZE0 <= 256

unsigned char tx_wr_index0,tx_rd_index0,tx_counter0;

#else

unsigned int tx_wr_index0,tx_rd_index0,tx_counter0;

#endif

برنامه شما توي اينجا مشكل داره:

کد: 
if (++rx_counter0 == 0)

       {

 #else

    if (rx_wr_index0 == RX_BUFFER_SIZE0) rx_wr_index0=0;

    if (++rx_counter0 == RX_BUFFER_SIZE0)

       {

       rx_counter0=0;

 #endif

       rx_buffer_overflow0=1;

       }

    }

صفحه‌ها: 1 2

arash_ee

sajadgh

علي برقي